|
|
3
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
56.75 Million / 5.67 Crore approx.
|
Location
|
Kerala Tenders
|
Ref.No
|
49541723
|
Closing Date
|
28 - May - 2022
|
12 Days to go
|
View Tender Details
|
|
Supply of material supply of various mgnregs works - quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, coir pith compost, foundations,footings, bases of columns, ect for mass concrete , stone for masonry work, fine sand (zone iv), interlocking c.c. paver block (80 mm thick, m-30), stone aggregate(single size): 06 mm nominal size, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), stone aggregate(single size): 10 mm nominal size, twisted steel/deformed bars, through and bond stone size 24 x 24 x 39cm, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), solid blocks of size 30x20x20cm, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, mild steel round bar above 12 mm dia, hollock wood in planks, kiln seasoning of timber, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, mild steel tubes hot finished welded type, welding by electric plant, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, galvanised steel j or l hooks 8 mm dia, bitumen washer, g.i. plain washer thick, precoated aluminium trafford sheet 0.450mm thick, polyethylene water storage tank with cover and suitable locking arrangemnet, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 15 mm outer dia. 12kgf/cm2, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, water proofing cement paint, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, epoxy paint, hollow blocks of size 40x20x20cm, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, deharadun white lime, pink primer (for wood), solid blocks of size 30x20x15cm, mild steel tubes hot finished welded type, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc pipe 50 mm outer dia.6kgf/cm2, aracanut post, gi trafford profile sheet 0.35mm thick, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, second class kail wood in planks, second class kail wood in scantling, safeda ballies 125 mm diameter, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, g.i pipes 50 mm dia, g.i. pipes 40 mm dia, pvc pipe 25 mm outer dia. 10kgf cm2, anjili wood scantls, galvanised steel corrugated sheets.
|
|
|
4
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
9.58 Million approx. / 95.87 Lakh approx.
|
Location
|
Kerala Tenders
|
Ref.No
|
49424611
|
Closing Date
|
25 - May - 2022
|
9 Days to go
|
View Tender Details
|
|
Supply of material for mgnregs works cc paver block 80mm, stone 06 mm, stone 40 mm, stone 20 mm, stone 10 mm, stone for masonry work, coarse sand zone iii, cement, steel reinforcement, solid block 30x20x15, solid block30x20x20, solid block40x20x10, mild steel round bar above 12mm dia , m.s tube hotfinished welded type , galvanised wire mesh .63mm, wire nail, galvanised steel bolts &nuts 6mmdia& 25mm long, 110mm dia pvc pipe 6 kgf/cm2, gi trafford profile sheet 0.35 mm thick , gi pipe 50mm dia, gi pipe 40mm dia, galvanised steel j or l hooks 8mm dia, epoxy paint, seedling-, royalty for good earth , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.5mm, bright finished or black enameled mild steel screws 40mm, rawl plug 50mm (designation 10nos), anjili wood scantls, flats up to 10mm in thickness, 200 mm aluminium aldrop, iron hooks and eyes 100mm, pvc elbow 110mmdia, fine sand (zone iv), black japan , flat glass sheetofnominal thickness 4mm, synthetic enamel paint in black or chocloate shade , glazed wall tile, vitrified tile 60mmx60mm, board , second class kali wood in planks , safeda balis 125mm dia, polyurethene bag, silpaulin sheet 9" and 120 gsm, neem cake, kappalandi pinnakku, cowdung, coir pith compost, green net 75%shade, bamboo 25mm dia 2.5mtr long
|
|
|
|
6
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
N.A.
|
Location
|
Kerala Tenders
|
Ref.No
|
49388570
|
Closing Date
|
23 - May - 2022
|
7 Days to go
|
View Tender Details
|
|
Supply of quarry waste, stone aggragate, coarse sand, portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40mm), wall form panel 1250x500mm l, corner angle 45x45x5mm 1.50m long, 100mm channel shoulder 2.5m long, double clip(bridge clip), single clip, m.s tube 40mm dia, twisted steel/deformed bars, mild steel sheets for tanks, structural ateel such as tees,angles,channels and r.s joists, iron pintels including weldded pin, mild steel sheets with bolts and nuts to rest on pintels, mild steel hooks, red oxide zinc chromate primer, rolling shutter made of 80x1.25rnm machine rolled laths, top cover for rolling shutters 1.25mm thick, mild steel tube hot finished welded type, welding by electric plant -, mild steel plates, g.i pipes, mild steel round bar, flates , float glass sheet of nominal thickness solid blocks, hollow blocks, laterate stone for masonry work, stone for masonry work, stone for masonry work, through and bond stone , anjili wood scantles, wire nails, pincoda wood scantles, aluminium aldrop, pvc plain roofing sheets, glavanised steel bolts and nuts , galvanized steel j or l hooks, g.i limpet washer, bitumen washer, pvc plain panel for ceiling work, pvc woodgen grains panel, pvc pipe, pvc elbow, pvc bend, pvc tee, pvc vent cowl, pvc end cap, pvc socket/coupling, pvc reducer, pvc door tee, pvc door elbow, pvc offset, hydraulic escavator, hire and running charges of, puddle clay, empty cement bag, hire charge of 5 hp engine and pump set, diesel oil, laterate stone, thambakam wood, hire charges of diesel road roller, common burnt clay, vengal wood planks, safeda ballies, galvanized wire mesh, solvent, stone aggragate, curing compound, binding wire, nails for fixing the clamp, material mta, valve, g.l plain washer thick, precoated aluminium trafford sheet, g.i traffod profile sheet, stainless stee screw, precoated glavanished iron profile sheet, galvanized steel plain sheets, dehradun white lime, interlocking c.c paver block, second class kali wood in planks, second class kali wood in scantling, epoxy paint, exterior primer, polethlene water storage tank with cover and suitable locking arrangement, cement primer, wire mesh, manglore ridge tiles, mangalore tiels, white cement, display board,
|
|
|
|
8
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
N.A.
|
Location
|
Kerala Tenders
|
Ref.No
|
49447398
|
Closing Date
|
23 - May - 2022
|
7 Days to go
|
View Tender Details
|
|
Supply material mgnregs works material - stone aggregate (single size)20mm nominal size, stone aggregate (single size)10mm nominal size, stone aggregate (single size)40mm nominal size, coarse sand zone 111(m sand for concreting, portland cement, quarry waste, stone for masonry work, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), royalty for good earth, solid blocks of size 30x20x15cm, fine sand (zone iv), mild steel sheets for tanks, iron pintels including weldded pin, mild steel sheets with bolts and nuts to rest on pintels, mild steel hooks, mild steel tubes hot finished welded type, welding by electric plant, galvanised steel j or l hooks 8 mm dia, bitumen washer, g.i. plain washer thick, precoated aluminium trafford sheet 0.450mm thick, precoated galvanised steel plain ridges, deharadun white lime, vitrified floor tile 60x60 cm, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel
|
|
|
|
|